This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Quote from: Dan on February 21, 2025, 04:42:11 PMWe can see the right 2 track is empty with no sound inside, so it will not sound
Try to select any sound before, so it will not be blank, then select your VST
Quote from: Dan on January 02, 2025, 12:28:53 AMIf you want to use voices from VST and vAsynth together, you should use for example RIGHT 1 for VST and RIGHT 2 for vAsynth, then save right sound.Come si salva in RIGHT2?
Quote from: Christoph on May 09, 2024, 07:34:25 AMFor low budget the Behringer FCB1010 is also a very good and easy to instal alternative. It works also perfect with vArranger2 (ca. 80 EUR used up to 150 EUR new). I use it in my Akkordeon-Setup. For example I control the rhythm-section (start/stop, Fill in, ...) and the text (page forward and back).to make it work you have to connect it to electricity
https://behringer.manymanuals.com/audio-amplifiers/midi-foot-controller-fcb1010/user-manual-31697
best regards
Christoph
Quote from: Christoph on May 13, 2024, 01:02:28 PMDan, you are wright. It should be a good usb to midi-cable (i.e Miditech Midilink Mini). At first I had two cheap one (logitech), but they didn't work together. The Midi-cables are connected in a normal 4-slot usb-hub (HAMA). To connect the footpedal you need only the MIDI-In-end. The Midi-out is not nessesary.Il problema è che non fanno il solo cavo midi in quindi devi tenerti il cavo con out inutilizzato
I don't use a wireless MIDI-hub.
Quote from: Dan on May 10, 2024, 12:01:08 PMI never tried it, but it should work, seems to need an external midi USB adapter and maybe some configuration. It is not very compact to carry
Quote from: Dan on April 21, 2024, 08:58:26 PMYes. Old and simple but very efficientPer il liscio sono i migliori. Dopo l'esperienza che la Solton fece con i ritmi del Ms40 fecero la Ms 50 quella senza cassa e poi la Ms60 con le casse incorporate,a seguire Ms 100. Dopo questa serie non si è capito più nulla. Evvero che la musica è cambiata la il liscio rimane sempre quello.
Quote from: agaton on April 29, 2023, 02:21:16 AMOne of the best Midi Pedals is Roland FC300. It is one luxus Pedal but it is perfect to work with vArranger² and in a same time also with one of Roland Midi V-Accordeons (or with Bugari-Evo Haria Accordeons).Costa un botto!
You cannot view this attachment.
Quote from: giupa on June 15, 2020, 02:43:26 PMBello. Complimenti!
Sto provando a sistemare un po' gli style. Questa è una piccola demo con uno style Bk7, banco sound emulazione bk7 più qualche suono di moxf.
Buon ascolto
https://drive.google.com/file/d/16C_9JuxlXqPYbvgkJq14wEAJjzXEw_Vr/view?usp=sharing
Quote from: DUODHER on February 09, 2020, 08:23:56 AM
bonjour
je souhaite revendre varranger au prix de 200 euros avec licence dans sa cle usb,quelle est la procédure à suivre afin que le nouvel utilisateur profite des mises à jour,activation,etc .
Merci pour vos réponses.
Quote from: pax_eterna on February 11, 2014, 07:47:08 PMQuote from: paoloaccordion on February 11, 2014, 05:09:11 PM
Hello Dan can send me the new version? You already have the vst?
I would suggest the VST's need to come from you
Quote from: Dan on January 29, 2014, 06:42:11 PM
Let me send you the latest version of vArranger that plays the Tyros 5 styles
Quote from: Gerard on January 30, 2012, 09:59:57 PM
I bought the Behringer FCB1010 for $137 USD, new, from eBay.
I believe this is the same one that is pictured in the vArranger manual.
http://www.behringer.com/EN/Products/FCB1010.aspx
To setup, the absolulute first thing that must be done is to calibrate the expression pedals or they will not work.
Just follow instructions in the manual.
Then, in Varranger, Options, Controllers, simply press the switch or expression pedal that you want to work for that function.
Personally, I use switches for start/stop, arrangerB, arrangerC, arrangerD, Transpose + and Transpose -.
The left expression pedal I use to control the volume for Left/Right Volume.
The right expression pedal I use for Style Volume.
Just one expression pedal alone would cost up to $50, and you could not separate the volume like you can on the Behringer.
That's my 2 cents for whatever it is worth.
Gerard
Quote from: Gerard on August 13, 2013, 03:44:11 PM
I do not know if you can use two USB midi cables.
In theory it should work.
I only have to use one.
This is something that maybe Dan could answer about using 2 USB midi cables.
Sorry I can't help you further.
Quote from: Gerard on August 13, 2013, 02:50:03 PM
Here is the link to the discussion about FSB1010
http://www.varranger.com/vforum/index.php/topic,89.msg4357.html#msg4357
Quote from: Gerard on August 13, 2013, 02:14:35 PMI placed a link to the discussion?
I had the FS13 pedal hooked to the Audya when I still had the Audya.
The Behringer FSB1010, I connect using a midi cable.
I have a USB MIDI cable with a MIDI IN plug and a MIDI OUT plug.
In vArranger, for 2nd MIDI IN, I select USB Midi Interface.
That connects the FSB1010 to vArranger.
In OPTIONS/CONTROLLER, I assign what I what to the switches or pedals.
There is another TOPIC on connecting the FSB1010 on here, that tells you how to hook it up.
Gerard
Quote from: Gerard on August 13, 2013, 12:19:45 PM
From what I remember, the FS13 pedals have a 15 pin connector and no USB port.
I use the Behringer FSB1010 and works fine
Quote from: Dan on April 24, 2013, 05:23:28 PMOk
in the next version .midi will be like .mid
for now, just rename the file extention .midi to .mid
Quote from: pax_eterna on March 18, 2013, 04:52:01 PM
It's okay Paolo, Dan is onto it -
Dennis
Quote from: pax_eterna on March 18, 2013, 04:41:56 PMQuote from: Dan on March 18, 2013, 03:35:50 PM
Can you send me the midi documentation of your accordion?
That was exactly what I was asking for ages ago!!!