Soundfont and SD1000 play together

[haweneu]

Hi,
i want to play for example Right1 only with Soundfonts and the rest with my SD 1000.

I edited some soundfonts so for example Steinway Piano is Bank 0 Program change 0, Special Guitar is Bank 0, Program change 1 ....

If i now start VA2 and use VA2 internal Synth only on MIDI 1, i see my Soundfonts in the Soundbank Piano.

But the VA2 internal Synth sounds have no sorted Bank and Programchangenumbers in one Group like Piano.

Where can i get a List of the Bank and Programnumbers of the VA2 internal Sounds? Then i can place my Soundfonts on Sounds from VA2, that i dont use!

And what can i do, to play Right1 with soundfonts and the rest with SD1000 and where can i then see the names of the used soundfont sounds and SD1000  sounds?

If i say in the MIDI setup, that MIDI1-out is for SD1000 and MIDI2-out2 is for the internal synth, i see for Right1 only the SD1000 Soundnames!

[Dan]

You should use MIDI OUT 1 = SD1000    MIDI OUT 2 = vArranger Synth

On Right 1 track, you right click and SEND TO MIDI OUT 2 only

To change the SF2 sound or Right 1 track, you can :

- Change sound from SD1000 sound list. The Grand Piano of SD1000 is Bank 0, Program 0... and it is the same as your SF2 piano sound.
or
- Go on the INS & SF2 button, click on SOUNDFONTS, and get the list of loaded SF2 sounds/banks
or
- Double click on the Right 1 track, to go to the SOUND EDIT screen. Then, on the top of the screen, you can change the BANK0  BANK32 and PROGRAMCHANGE values directly.

Once your sound is OK, you do SAVE RIGHT SOUND, as usual.

You can also mix a piano from SF2 + a strings from SD1000 etc...

[haweneu]

Hi,
thanks, you are very fast!
I will test it. There are some very good Soundfonts in the Internet.
But in the moment, the SD1000 has the best sounds!

[haweneu]

Hi,
it works.

But if i click on INS  & SF2 Button, i see only an empty screen, no loaded SF2.

But in the upper right Soundfield i see the name of my SF2 Instruments, that override the names of your softsynth.

[Dan]

When you are in the INS & SF2 screen, click on the SoundFont button in the top left
Also, select a bank in the bottom left

[haweneu]

Hi,
i will test it tomorrow!

Can i make modifications on the Online Usermanual in english?
I tried the edit function but my ipad then hangs!

[Dan]

Yes you can

[haweneu]

Hi,
i think the ipad is the problem.
I will test it on WIN PC!